How To Perform Canon Mx922 Setup?

• Unpack the printer from the carton.
• Place the printer on a flat surface and away from direct sunlight.
• Peel off the protective tapes surrounding the printer body.
• Open the document cover and get rid of the packaging material present inside.
• Remove the power cord from the carton.
• Connect the plug to the main power source and to the back end of the printer.
• Press the Power button to turn on the printer.
• Use the navigation buttons on the control panel and select the language of your choice.
• Open the cartridge access door to install the ink cartridges.
• Unpack the ink cartridge from the cover and push it into the respective cartridge slot.

• Make sure that the cartridge sits in place (repeat the step for the other ink cartridges).
• Once the cartridge installation is successful, the LED in the cartridge slots will light up (this indicates proper installation).
• Close the cartridge access door.
• Pull the cassette from the bottom of the printer.
• Move the paper guides to the sides inside the cassette.
• Place a paper stack in the cassette; adjust the paper guides according to the edges of the paper (Do not exceed the tray limit).
• Push the cassette into the printer. Now Canon Mx922 Setup of Hardware is done.

• Place the installation CD in the CD/DVD drive of the computer.
• Wait for the setup window to open.
• Click Run.exe and follow the commands on the screen.
• Click the Next button. Now Canon Mx922 Setup of Software is done.

• When the connection screen opens, select the method of connection you want for the printer.
• Complete the full software setup for the printer.

CANON MX922 DRIVER WINDOWS

• There are two ways to download the Canon MX922 printer driver for your computer.
• On this very support page, click the Driver Download button.
• The printer driver for your computer will be downloaded based on the operating system you are using.
• You can also download the driver from the official Canon support page.
• Enter the URL for the Canon support page in your browser.
• In the search bar, type Canon MX922 and press the Enter button.
• The printer page will now open.
• Click the Drivers tab.
• Scroll down the page, click Your Operating System drop-down list, and choose the OS and the version.
• Once the page refreshes, go to the Drivers section and click the DOWNLOAD button.

CANON MX922 DRIVER MAC

• On this very support page, you can download the driver for your Mac computer.
• Click the Driver Download button for Mac.
• Once done, the driver will be downloaded immediately.
• Another way to download the printer driver is from the official Canon support page.
• Open the Canon support page for the Canon MX922 printer.
• Click the Drivers tab on the page.
• Click the Your Operating System drop-down list and choose the Mac OS and the version of Mac.
• Wait for the support page to refresh.
• The Canon support page will say that you can easily print using the AirPrint feature.

• Open the driver you have downloaded.
• Wait for the installation screen or the setup window to open.
• Follow the prompts and click the Start button.

• As you follow the commands, wait for the connection screen to open.
• Now, select the type of connection you want to have for the printer.
• Complete the installation process for the printer driver.

CANON MX922 PRINT SETUP

• Make sure that the MX922 printer is turned on.
• Ensure that the media is loaded into the Canon MX922 printer.
• Let’s assume that you have downloaded the printer driver for the Canon printer.
• Open the Canon printer driver.
• Click the Quick Setup tab.
• Select the type of print you want from the list.
• In the Additional Features section, select the method of print.
• Select the Paper Source.
• Select the Print Quality and the Media Type.
• Click the Apply button followed by OK.
• The printer will start printing the document.

CANON MX922 SCANNER SETUP

• Ensure that the printer is turned on.
• Press the Scan button on the Canon printer control panel.
• Use the navigation buttons on the control panel and select your computer; press the OK button.
• Press the Document or Photo option.
• If you want to adjust the scan settings, press the Function button on the control panel.
• Use the arrow buttons to make further changes to your document.
• Now, place the original document on the scanner glass or into the Auto document feeder.
• To start scanning, press the Color button or the Black button.

• Ensure that the printer is turned on.
• Connect the cord to the LINE port of the Canon printer and to the phone wall jack.
• See to it that the Canon printer is turned on.
• Press the Menu option.

• Select Setup > Device settings > Fax settings; press the OK button after each selection.
• Select the Start easy setup option and press the OK button.
• Follow the commands on the screen and complete the full Fax setup.

• With the Canon MX922 printer turned on, press the Menu button.
• Use the navigation buttons on the control panel and select the WLAN setup button.
• The printer display will show the access point detected.
• The printer will prompt you to press and hold the WPS button on the router.
• Press the Stop button on the control panel.
• The Wireless LAN setup screen will open with three options.
• Select the Standard setup option.

• The printer will list the available wireless networks near it.
• Select your Wi-Fi network.
• When the printer asks you to enter the Wi-Fi Passphrase, press the OK button.
• With the virtual keypad, enter the password.
• Once finished, choose the Done button.
• Select the End Setup button.
• The printer will now try to connect to the access point.
• Once done, the printer will be connected to the wireless network.

• On your iOS device, select the document you want to print.
• Tap the Share icon in the middle.
• Select Print.

• Choose the Canon MX922 printer from the printer list.
• Tap the + icon if you want to increase the number of copies.
• Select the Print button.

WINDOWS

• Open the Control Panel window on your computer.
• Select the Printers & Scanners option.
• Select the printer from the printer list.
• Click on the Open queue button.
• Delete the pending print jobs from the list.

MAC:

• Click the Apple icon.
• Select the System Preferences option.
• Click on the Printers & Scanners option.
• Do a double-click on the printer.
• Click on the pending print jobs and click on the X button to close.

• Open the Control Panel window on your computer.
• Select the Programs option and click the Uninstall a program button.

• The window will now open a list of applications.
• Select the Antivirus/Firewall application and click the Uninstall button.

• Open the Run command (Windows key + R).
• Type services.msc in the Run command field and press the Enter button.
• The Windows Services window will now open.

• Locate the Print Spooler service.
• Double-click and select the General tab.
• Under Service Status, click the Start button.

• Make sure that the Canon MX922 printer is connected to the power source.
• If the power light on the Canon printer is flashing, it means that the printer has encountered an error.
• Make sure that the light is solid.

• If you have the Canon printer connected to the computer through a USB cable, make sure that the cable at both ends (printer and computer) is secured properly.
• If you find there is a physical problem with the USB cable, replace it.

WINDOWS

• Open the Control Panel window on your computer.
• Select the Printers & Scanners option.
• Select the Canon MX922 printer from the printer list.
• Click on the Open queue button.
• Do a right-click and delete the pending print jobs from the list.

MAC

• Click the Apple icon.
• Select the System Preferences option.
• Click on the Printers & Scanners option.
• Do a double-click on the Canon MX922 printer.
• Click on the pending print jobs and then click on the X button to close them. Now we have seen how to perform Canon Mx922 Setup and Troubleshoot the issues.