How To Fix Service Error 79 On HP Laserjet Pro 200?

Fix Service Error 79 On HP Laserjet Pro 200

Error codes occur on a printer for various reasons. In many cases, you cannot find the exact reason behind the issue. If you encounter the service error 79 on your HP printer, the problem might be with the firmware, driver, or printer itself. The best way to know how to fix this error code is to troubleshoot the problem and determine the possible cause. This post will provide you with some efficient solutions to fix the service error 79 on your HP LaserJet Pro 200 printer. Read this comprehensive guide to know How To Fix Service Error 79 On HP Laserjet Pro 200.

Run The Printer Troubleshooter

Your computer's built-in troubleshooter can help you resolve many printer problems efficiently. Try out the following solution and check if it works for you.

  • Open the Run box on your Windows 10 computer by pressing the Windows and R keys simultaneously.
  • Type ms-settings:troubleshoot and click OK.
  • Now, scroll down to the Get up and running section and click the Run the troubleshooter button.
  • This utility will complete the initial scan and guide you in fixing the trouble.
  • Now, see if your HP printer's service error code 79 has disappeared.

Disable Ipv6 Protocol

In many cases, disabling the IPv6 protocol can help you fix some error codes on printers. Follow these instructions to disable IPv6.

  • Head to the Settings section of your Windows computer by pressing the Windows and I keys.
  • In the left-side panel, click the Network & Internet option and select “Change adaptor options.”
  • In the Wi-Fi Properties dialog box, go to the Networking tab.
  • Here, click the Properties button and uncheck the Internet Protocol Version 6 (TCP/IPv6) option.
  • Finally, restart your computer and ensure that the error code is resolved.

Power Cycle Your Printer

A simple power cycle can do miracles in fixing printer error codes. Implement the instructions below to power cycle your HP LaserJet Pro 200 printer.

  • Remove the power cord from the printer’s rear port while your printer is turned on.
  • Now, remove the power cord from the power source.
  • Wait for at least a minute.
  • Reconnect the power cord to the appropriate port on your printer and the power source.
  • If you use a surge protector, remove it and plug the power cord directly into the power source.
  • Turn on your HP LaserJet printer and wait for it to initialize.
  • Once the printer comes to the ready state, ensure that the service error 79 has disappeared.

Update The Driver And Firmware

  • It is important to keep the printer driver and firmware updated to ensure proper functioning. If they go outdated or corrupted, you will end up in trouble.
  • To update the printer driver, visit HP's website, enter your printer model, and download the updated software compatible with your Operating System. Then, install the software on your Windows computer by following the on-screen instructions.
  • If there is an issue with the printer's firmware, you need to update it as soon as possible. Follow these instructions to proceed further.
  • Open the HP Smart app and go to Settings (Advanced)> Advanced Settings.
  • Click Tools (Web Services)> Printer Updates (Product Update)> Check Now.
  • Proceed with the prompts on the screen to install the new firmware. Then, restart your printer and ensure that the problem is resolved.
  • If you don't have the HP Smart application, you can download the updated firmware from HP's official website just as you did for the updated driver. Then, complete the installation and ensure your trouble is resolved.
  • Once the installation gets completed, restart your computer and printer, and then ensure the problem is solved.

We hope the above troubleshooting solutions have helped you resolve on How To Fix Service Error 79 On HP Laserjet Pro 200. For further questions and clarifications, get in touch with our technical experts using the Call button on this page.